|
JKW-IP Video Intercom Adaptor
The JKW-IP and software combine to create a network door entry video intercom system.
The JKW-IP adaptor is an addition to a single door, single master and allows up to 20 sets to be connected to up to 10 computers.
Features
 |
IP adaptor for managing entrances with JK systems from your PC*
Maximum of 10 PCs* on a single IP adaptor. Max. 20 JKW-IP adaptors connected together |
|
|
Door release |
|
Film recording during a conversation (video + audio) |
|
Visit alert messages by e-mail (photo and text) up to 10 e-mail addresses |
|
Storage of information up to 10 GB on your PC.* |
|
Maximum of 10 PCs* on a single IP adaptor. Max. 20 JKW-IP adaptors connected together |
|
Compatible with 32 bit Operating Systems, Windows XP, and Windows Vista |
|
4 External sensor inputs (smoke, fire & intruder alarms) |
|
1 additional dry-contact output |
|
Pan-Tilt mode, wide-angle and zoom control of the camera on the monitor |
|
Monitoring with audio by the monitor button |
 |
The JKW-IP provides you with sophisticated network-based IP video intercom solutions. It comes with software for you to use your network-connected PC as a sub monitor unit of the JK Series, giving you the opportunity to improve your door entry security management.
This adaptor can be used with either the JK-1MD or JK-1MED masters and you can control up to 20 door stations from up to 10 PC’s (each JK door stations requires its own JK-1MD or JK-1MED master). Answer your door from our physical master or from any network location.
Click this link for JK Product Information
The system allows for call-in to the PC via the JKW-IP software, two way audio and one way video communication between the door station and the PC, as well as the ability to activate a door or gate release mechanism.
 |
 |
 |
|
| |
Specifications |
| Power Source |
18V DC - PS-18D, JKW-IP power supplied by JK Series Master |
| Consumption |
Max.200mA |
| Software |
JKW-IP Software and updates included with JKW-IP Network Adaptor at no additional cost
Processor: 2GHz or faster, RAM: minimum 1GB, Storage: 10MB or more (additional memory
required for movie recording), Sound Card: 8-bit full duplex - Direct sound compatible,
Display: 1024 x 786 or higher, Runtime: Microsoft .NET framework 2.0 or later, Network:
Wired 1OOBase-TX recommended
Operating System: Windows' XP (SP3), Windows' Vista (SP1) |
| Protocol |
TCP/IPv4, UDP/IPv4, SIP, etc |
| Network bandwidth |
320k-8Mbps |
| Compatibility |
JK-1 MED with memory JK Master Station, JK-1 MD JK Master Station |
| Languages |
English, French, Spanish, Japanese, German, Italian, Dutch |
| |
|
Optional Input device specifications |
|
| Input method |
N/O or N/C dry closure contact (start signal only detection method) |
| Detection confirmation time |
1OOmS or more |
| Contact resistance |
Closed circuit: 700Ω or less
Open circuit: 3KΩ or more |
| |
|
Optional Output device Specifications |
|
| Output method |
Dry contact (N/O) |
| Relay Contact Rating |
AC 24V 0.5A (resistive load)
DC 24V O.5A (resistive load) |
|
 |
|
